Työalustallinen perävaunu

ES-GE Tandemanhänger - Bordwände, CV

Equipment Overview Chassis: Steel welded construction with welded longitudinal beams and punched Z-crossmembers, close crossmember spacing for high floor load capacity. Ramp storage: Two insertion pockets between the longitudinal beams behind the axle assembly under the loading platform, each for one loading ramp, with a locking plate in the rear head frame. Underrun protection: According to EC regulations. Front landing gear: Landing gear with single-sided operation. Rear supports: Two adjustable drop-down supports. Axles: 2 x 10 t air-suspension axle units, SAF make, drum brakes approx. 300 x 200 mm, hub-centric for twin tires, ABS, total air suspension lift approx. 200 mm (approx. 140 mm lift / 60 mm lowering), operated via hand lever with locking positions. Tyres: 8-piece, 235/75R 17.5 - manufacturer of our choice, on steel rims 6.75 x 17.5, ET mounted. Spray protection: PVC mudguards in front of and behind the axles according to EC standard. Load securing: Approx. every 150 mm on the outer frame a hole for lashing straps, tensile strength approx. 2.5 t (lashing straps can be hooked in when side walls are closed, outer frame bevelled). 6 pairs of foldable lashing rings evenly distributed, tensile strength approx. 8 t. Stanchion pockets for plug-in stanchions 80/50: 3 pairs of stanchion pockets in the outer frame, evenly distributed. Brake system: Air brake system according to EC with EBS. Two spirals as connection to the towing vehicle with red/yellow coupling heads. Spring parking brake acting on one axle. Floor: Approx. 28 mm Z-hardwood floor recessed into the outer frame. Front wall: 25 mm board wall, removable. Lighting system: Lighting according to EC, 24 volt, multi-chamber rear lights, number plate lights, side marker lights and lane departure lamps at the rear, connection plate left on the drawbar incl. connection cable with 15-pin and 2 x 7-pin plugs. Accessories: - 2 wheel chocks with holders - Detachable flashing beacon at the rear - Delivery of an additional 40 mm towing device (GG max. 13,500 kg) Paintwork: Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to latest technical standards. Body components cleaned, primed and hot-dip galvanized. Chassis: hot-dip galvanized + RAL 3002 carmine red Side walls: RAL 3002 carmine red Kinnegrip stanchions: RAL 3002 carmine red Hubs: KTL black Underrun protection: RAL 9010 pure white Rims: RAL 9006 silver Attachments: galvanized / KTL black Rear extension approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm. Length-adjustable rigid drawbar, 6 x approx. 100 mm, with bolted towing eye approx. 50 mm according to DIN 74053. 4 rows of stanchion pockets across the loading area, evenly distributed. 12 plug-in stanchions made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long. Container locks for 1x20' container. Container locks 1 x 20' extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452. 1 pair of aluminium loading ramps, load capacity per pair approx. 9,000 kg. 4 stainless steel tool boxes between and behind the axles. 6 x 25 mm side walls and rear wall made of anodized aluminum hollow profiles, approx. 600 mm high, fold-down and removable, removable Kinnegrip stanchions (interior width approx. 2,480 mm), including side wall storage magazine at the front wall.
Gsdpfxoy Auhbe Ag Teir

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.