Siilo-puoliperävaunu

FELDBINDER OMEPS CR 60

OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60

Chassis:
Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva

Axles and suspension:
22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn

Wheels and tires:
6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120

Braking system:
EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected

Landing gear:
Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands

Electrical system:
All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console)

Tank design:
A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery.

Operating parameters:
Ljdpfx Agox Nugdoyjhr
Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C.

Filling options:
5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear

Material discharge:
1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A

Air piping:
A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing

Ladder and walkway:
1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank

Discharge hose storage:
4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76

Accessories:
The side underrun protection is made of anodized aluminum...

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.