Avoin puoliperävaunu
Fliegl SDS 350 Mega

EXW Kiinteä hinta alv 0% (veroton)
10 500 €
Kunto
Käytetty (täysin toimintakuntoinen)
Sijainti
Triptis Saksa
Avoin puoliperävaunu Fliegl SDS 350 Mega
Avoin puoliperävaunu Fliegl SDS 350 Mega
Avoin puoliperävaunu Fliegl SDS 350 Mega
Avoin puoliperävaunu Fliegl SDS 350 Mega
Avoin puoliperävaunu Fliegl SDS 350 Mega
Avoin puoliperävaunu Fliegl SDS 350 Mega
more Images
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega

Perustiedot

Koneen nimitys:
Avoin puoliperävaunu
Valmistaja:
Fliegl
Malli:
SDS 350 Mega
Koneen numero:
WFDFLT23002024348
Kunto:
käytetty
Toiminnallisuus:
täysin toimintakuntoinen

Hinta ja sijainti

EXW Kiinteä hinta alv 0% (veroton)
10 500 €
Sijainti:
Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Saksa
Soita

Tekniset tiedot

Mitat ja paino

Kokonaispaino:
39 000 kg
Omamassa:
5 865 kg
Maksimi kuormauspaino:
33 135 kg
Kokonaispituus:
13 850 mm
Kokonaisleveys:
2 550 mm
Kokonaiskorkeus:
1 820 mm

Akselit ja pyörät

Akselikokoonpano:
3 akselia
Jousitus:
ilma
Renkaan koko:
435/50 R19,5"
Renkaiden kunto:
49 prosentti

Dokumentointi ja sertifiointi

Seuraava tarkastus (TÜV):
04/2027

Lisätietoja

Ensirekisteröinti:
12/2018

Tarjouksen tiedot

Ilmoituksen tunnus:
A23358848
Viitenumero:
49397
Päivitys:
viimeksi 19.11.2026

Kuvaus

# Chassis / Frame
- Welded fine-grain steel construction, fifth wheel plate with replaceable 2" kingpin.
- Full-width rear ramp attachment rail for aluminium ramps. Suitable for loading construction machinery up to 8,000 kg gross weight and 2,500 mm width. Loading ramps must only be used with rear stabilisers deployed!
- Slightly angled outer frame with Load-Lock profile for lashing strap attachment. With side boards fitted, the side boards must be opened to attach straps.
- 24-tonne, 2-speed landing gear, single-side operation, straight lower section, without thrust compensation.
- Folding rear stabilisers, wheel chocks with holders, aluminium side underrun protection, galvanised steel rear underrun protection.
- Quarter-shell mudguards in front of the 1st axle and behind each axle, anti-spray flaps behind each axle.
- Spare wheel carrier for 1 spare wheel incl. mounting kit; spare wheel matching the standard tyres, steel rim.
# Axles and Suspension
- SAF disc brake axles, laser-aligned axles and chassis to reduce tyre wear and fuel consumption.
- Air suspension.
- 1st axle automatic lift axle incl. forced lowering and traction assistance, activated by braking 3 times. Traction assistance operates with up to 30% axle load exceedance and max. 25 km/h.
- Lift axle operated below the recommended ride height; no warranty for tyre damage.
# Braking System
- 2-line compressed air braking system, spring-loaded parking brake.
- 2 front fail-safe coupling heads, without connecting lines.
- EBS electronic braking system with front EBS socket, without connecting cable.
- Towing vehicle must ensure ABS functionality!
- Raise/lower valve.
- Ride height with lift axle; raising the lift axle increases loading/overall height by 50 mm (Mega Flex only at low ride or coupling height).
- Vehicle stability system.
# Wheels and Tyres
- 435/50 R19.5 tyres, make selected by manufacturer.
- Steel rims, factory silver.
# Electrical System
- 24 V, multi-chamber lights, yellow LED side lighting.
- 2 white front position lights.
- 2 white/red rear outline marker lights.
- 1 x 15-pin socket at front, without connecting cable.
# Floor
- Approx. 30 mm plywood panels with Omega inserts at cross joints, supported by 8 longitudinal beams for high point loads; forklift axle load up to max. 7,900 kg.
- Premium floor sealing, sealed around the entire perimeter.
- Note: floor deformation due to weather conditions possible!
# Front Bulkhead / Front Corner Posts
- 25 mm aluminium hollow profile, 700 mm high; steel corner posts in volumetric design.
Iode Ak Npaspfx Abhoii
- Crash-Blocker, internal steel impact protection approx. 140 mm high at the bottom.
# Operation / Approval
- Special permit required for gross combination weight exceeding 40 t.
- Exemption required for 9,000 kg axle load. Observe country-specific approval regulations.
- CZ registration, EC type approval according to 2007/46, 24/7 service hotline.
- Prepared for single-line number plate holder, warning board according to ECE 70.
- Reflective contour markings according to ECE R048, white on sides and red at rear.
# Finish
- Frame hot-dip galvanised incl. passivation, landing legs black coated, front corner posts hot-dip galvanised, aluminium front bulkhead.

Toimittaja

Rekisteröitynyt vuodesta: 2006

198 Verkkoilmoitukset

Soita

Lähetä kysely

Maaus 
Saksa
Itävalta
Sveitsi
Yhdysvallat
Yhdistynyt kuningaskunta
Ranska
Belgia
Espanja
Meksiko
Italia
Alankomaat
Puola
Venäjän federaatio
Valko-Venäjä (Valko-Venäjän tasavalta)
Ukraina
Viro
Turkki
Uusi-Seelanti
Irlanti
Tšekin tasavalta
Tanska
Suomi
Ruotsi
Norja
Luxemburg
Kreikka
Liettua
Latvia
Islanti
Portugali
Brasilia
Venezuela
Argentiina
Unkari
Slovakia
Romania
Moldova
Slovenia
Serbia
Montenegro
Albania
Kroatia
Bulgaria
Pohjois-Makedonia
Bosnia ja Hertsegovina
Israel
Egypti
Marokko
Intia
Indonesia
Etelä-Korea
Japani
Thaimaa
Malesia
Vietnam
Kiina, Kansantasavalta
Taiwan
Iran
Bangladesh
Huomautus: Pyyntösi välitetään kaikille kyseisen koneluokan myyjille. Tämän ansiosta voit saada erittäin paljon tarjouksia.
Pyyntöä ei voitu lähettää. Yritä myöhemmin uudelleen.

Puhelin & Faksi

+49 36482... ilmoitukset