Matala lavettipuoliperävaunuFliegl
SDS 390, 3x VORHANDEN!
Matala lavettipuoliperävaunu
Fliegl
SDS 390, 3x VORHANDEN!
kiinteä hinta ei sisällä ALV
24 900 €
Kunto
Käytetty
Sijainti
Bovenden 

Näytä kuvat
Näytä kartta
Konetiedot
- Koneen kuvaus:
- Matala lavettipuoliperävaunu
- Valmistaja:
- Fliegl
- Malli:
- SDS 390, 3x VORHANDEN!
- Kunto:
- käytetty
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
24 900 €
- Myyjän sijainti:
- Alte Bundesstraße 48, 37120 Bovenden, Saksa

Soita
Tekniset tiedot
- Omamassa:
- 6 990 kg
- Maksimi kuormauspaino:
- 28 010 kg
- Kokonaispaino:
- 35 000 kg
- Akselikokoonpano:
- 3 akselia
- Ensirekisteröinti:
- 01/2021
- Seuraava tarkastus (TÜV):
- 12/2026
- Kuormatilan pituus:
- 10 000 mm
- Lastitilan leveys:
- 2 500 mm
- Kuormatilan korkeus:
- 1 mm
- Jousitus:
- ilma
- Renkaan koko:
- 235/75R17.5
- Väri:
- valkoinen
- Ajettuja kilometrejä:
- 1 001 km
- Vaihteistotyyppi:
- muu
- Ohjaamo:
- muu
- Varusteet:
- ABS
Tarjouksen tiedot
- Listaustunnus:
- A20802252
- Viitenumero:
- 8993
- Päivitetty viimeksi:
- 19.12.2025
Kuvaus
Vehicle location: en route / in transit, 3 axles, air-suspended, last axle steering, ABS (anti-lock braking system), lashing rings, underrun protection, supports, storage box
Superstructure: 3 units available! Total length approx.: 13,800 mm
Maximum total width: 2,550 mm
Total height approx.: 2,488 mm
Gooseneck length approx.: 4,050 mm
Lowered bed length approx.: 9,600 mm
Loaded loading height in the low bed approx.: 900 mm
Internal width approx.: 2,480 mm
Coupling height approx.: 1,150 mm
King pin installation dimension approx.: 1,680 mm
Iijdpfxox I I Ape Aafek
Front corner dimension approx.: 2,040 mm
Fine-grained steel welded construction, reinforced version, fifth wheel plate with replaceable 2" king pin, outer frame slightly angled with "Load-Lock profile" for tension belt attachment, 8 additional pairs of lashing rings integrated into the outer frame, each rated at 5 t, 1 plug-in compensating support on the low loader deck (3-piece), hardwood cross-member at least 200 mm wide for height compensation; gooseneck can be pegged in 3 positions with a parking position at the stepped area, 4 pairs of stake pockets 83 x 83 mm recessed in the floor for plugging in the compensating support, open storage compartment for insert stakes below the loading platform, 13 pairs of stake pockets integrated in the outer frame, 70 x 40 mm internal dimension (3 pairs on gooseneck and 10 pairs on low loader deck), 3 rows of stake pockets recessed in the floor with 7 stake pockets each, 70 x 40 mm internal dimension, 26 plug-in stakes galvanized (width = 80 / depth = 50 / length = 1,200 mm), hardwood floor approx. 30 mm thick, longitudinally laid with omega profiles for high point load capacity in the wheel arch area, steel/chequer plate floor.
All information subject to change, as the vehicle is currently in transit! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Superstructure: 3 units available! Total length approx.: 13,800 mm
Maximum total width: 2,550 mm
Total height approx.: 2,488 mm
Gooseneck length approx.: 4,050 mm
Lowered bed length approx.: 9,600 mm
Loaded loading height in the low bed approx.: 900 mm
Internal width approx.: 2,480 mm
Coupling height approx.: 1,150 mm
King pin installation dimension approx.: 1,680 mm
Iijdpfxox I I Ape Aafek
Front corner dimension approx.: 2,040 mm
Fine-grained steel welded construction, reinforced version, fifth wheel plate with replaceable 2" king pin, outer frame slightly angled with "Load-Lock profile" for tension belt attachment, 8 additional pairs of lashing rings integrated into the outer frame, each rated at 5 t, 1 plug-in compensating support on the low loader deck (3-piece), hardwood cross-member at least 200 mm wide for height compensation; gooseneck can be pegged in 3 positions with a parking position at the stepped area, 4 pairs of stake pockets 83 x 83 mm recessed in the floor for plugging in the compensating support, open storage compartment for insert stakes below the loading platform, 13 pairs of stake pockets integrated in the outer frame, 70 x 40 mm internal dimension (3 pairs on gooseneck and 10 pairs on low loader deck), 3 rows of stake pockets recessed in the floor with 7 stake pockets each, 70 x 40 mm internal dimension, 26 plug-in stakes galvanized (width = 80 / depth = 50 / length = 1,200 mm), hardwood floor approx. 30 mm thick, longitudinally laid with omega profiles for high point load capacity in the wheel arch area, steel/chequer plate floor.
All information subject to change, as the vehicle is currently in transit! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2002
Lähetä pyyntö
Puhelin & Faksi
+49 551 8... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Pieni ilmoitus
Bovenden
1 493 km
Matala lavettipuoliperävaunu
FlieglSDS 390, 3x VORHANDEN!
FlieglSDS 390, 3x VORHANDEN!
Pieni ilmoitus
Bovenden
1 493 km
Matala lavettipuoliperävaunu
FlieglSDS 390, 3x VORHANDEN!
FlieglSDS 390, 3x VORHANDEN!
Pieni ilmoitus
Bovenden
1 493 km
Matala lavettipuoliperävaunu
FlieglSDS 390, 3x VORHANDEN!
FlieglSDS 390, 3x VORHANDEN!
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe













































