Lava / pressuFliegl
SDS 390 RoadRunner
Lava / pressu
Fliegl
SDS 390 RoadRunner
EXW Kiinteä hinta alv 0% (veroton)
9 500 €
Kunto
Käytetty
(täysin toimintakuntoinen)
Sijainti
Triptis 

Konetiedot
- Koneen nimitys:
- Lava / pressu
- Valmistaja:
- Fliegl
- Malli:
- SDS 390 RoadRunner
- Koneen numero:
- WFDFLT33902017848
- Kunto:
- käytetty
- Toiminnallisuus:
- täysin toimintakuntoinen
Hinta ja sijainti
EXW Kiinteä hinta alv 0% (veroton)
9 500 €
- Sijainti:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

Soita
Tekniset tiedot
- Omamassa:
- 6 537 kg
- Maksimi kuormauspaino:
- 28 463 kg
- Kokonaispaino:
- 35 000 kg
- Akselikokoonpano:
- 3 akselia
- Ensirekisteröinti:
- 10/2015
- Kuormatilan pituus:
- 13 650 mm
- Lastitilan leveys:
- 2 480 mm
- Kuormatilan korkeus:
- 2 790 mm
- Kokonaispituus:
- 13 850 mm
- Kokonaisleveys:
- 2 550 mm
- Kokonaiskorkeus:
- 4 000 mm
- Jousitus:
- ilma
- Renkaan koko:
- 385/65 R22.5"
- Väri:
- hopea
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A9058631
- Viitenumero:
- 37357
- Päivitys:
- viimeksi 06.06.2026
Kuvaus
The images are archive images! The vehicle may be in use!
Klodpfjkyrmijx Afxju
Fine-grained steel welded construction in lightweight design, kingpin plate with 2 replaceable kingpins, outer frame slightly angled with load-lock profile for attaching lashing straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened. 24-ton, 2-speed landing gear, single-side operation, with straight lower section, without lateral thrust compensation, door latch on the side, support wedges with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support foot distance or free rear swivel radius approx. 1930 mm, quarter-shell fenders in front of and behind the axle unit, with anti-splash flaps only on the last axle, rear impact protection, pallet stop on both sides approx. 20 - 25 mm high, in bolted design, loading height is reduced by approx. 20 - 25 mm.
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, actuation 3x brakes (with starting assist up to max. 25 km/h).
Floor: Sieve-printed plates approx. 30 mm thick, crossbeams with omega insert, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg.
Front wall/corner posts at the front: 2,480 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection.
Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, hydraulic lifting roof with hand pump at each corner post, can be raised by 400 mm. Can be driven with the raised roof, adjustable by 4 x 50 mm upwards. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with the tarpaulin.
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Klodpfjkyrmijx Afxju
Fine-grained steel welded construction in lightweight design, kingpin plate with 2 replaceable kingpins, outer frame slightly angled with load-lock profile for attaching lashing straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened. 24-ton, 2-speed landing gear, single-side operation, with straight lower section, without lateral thrust compensation, door latch on the side, support wedges with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support foot distance or free rear swivel radius approx. 1930 mm, quarter-shell fenders in front of and behind the axle unit, with anti-splash flaps only on the last axle, rear impact protection, pallet stop on both sides approx. 20 - 25 mm high, in bolted design, loading height is reduced by approx. 20 - 25 mm.
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, actuation 3x brakes (with starting assist up to max. 25 km/h).
Floor: Sieve-printed plates approx. 30 mm thick, crossbeams with omega insert, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg.
Front wall/corner posts at the front: 2,480 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection.
Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, hydraulic lifting roof with hand pump at each corner post, can be raised by 400 mm. Can be driven with the raised roof, adjustable by 4 x 50 mm upwards. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with the tarpaulin.
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Viimeksi verkossa: viime viikolla
Rekisteröitynyt vuodesta: 2006
189 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 36482... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Pieni ilmoitus
Triptis
1 502 km
Perävaunu, jossa on lava-alusta ja pressu
FLIEGL3-Achs Gardine SDS 390 RoadRunner
FLIEGL3-Achs Gardine SDS 390 RoadRunner
Pieni ilmoitus
Triptis
1 502 km
Avoin puoliperävaunu pressulla
FLIEGLSDS 390 RoadRunner // SONDERAKTION
FLIEGLSDS 390 RoadRunner // SONDERAKTION
Pieni ilmoitus
Triptis
1 502 km
Perävaunu, jossa on lava-alusta ja pressu
FLIEGL3-Achs Gardine SDS 390 RoadRunner
FLIEGL3-Achs Gardine SDS 390 RoadRunner
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe



































































