Vaihda runko

Fliegl Wechselbrücke 7,82m Jumbo

Further information
Chassis tandem trailer
Welded steel construction with approx. 152 mm high floor assembly, load-oriented and torsion-resistant steel frame construction. Longitudinal beam floor construction with a load-resistant outer frame and with guide tunnel at 600 mm intervals, tunnel with guide at the top and sides, tunnel height approx. 45 mm, 4 x swap body corner fittings on 20ft base.
4 x support legs for Jumbo parking height 970 mm, extendable and foldable sideways by 90° with short safety strut and safety catch, bolt safety catch on the frame, stable drop latch as second transport safety catch, -symmetrical arrangement of support legs form A 2 for CWB C 745 / 782 for parking height of approx. 970 mm
Reinforcement between the support legs
7 pairs of lashing eyes embedded in the outer frame, 2.5 tons each
Heavy-duty pallet stop on both sides, approx. 20 - 25 mm high, with lashing option every 200 mm, loading height reduced by approx. 20 - 25 mm
Door stop on the side
Impact protection at the rear made of flat iron
Floor
Screen printing plates approx. 27 or 30 mm thick, manufacturer's choice, for high point load capacity, for forklift axle load up to max. 4400 kg
Front wall/front stanchions
2,800 mm high, rest with tarpaulin, steel corner stanchions in volume design, release device for side tarpaulin on front wall
Center stanchions
1 pair of sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom.
Insertion slats
3 rows of aluminum V-insertion slats or wooden insertion slats of the manufacturer's choice,
1 additional row/rows of aluminum V-slats
Rear wall/rear stanchions
Rear corner stanchions, steel up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet
Rear portal doors, 2-leaf with 2 internal espagnolette locks each
Tarpaulin
Tarpaulin, with welded-in horizontal and vertical straps
Stainless steel tension locks
Roof
Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white
EcoLift - lifting roof can be raised by approx. 380 mm, with gas pressure damper support,
Approval / plates
Country of approval: Germany
Manufacturer's certificate in accordance with EN 12642 XL
Paint finish
Hot-dip galvanized frame
Front corner stanchions hot-dip galvanized
Front wall aluminum
Rear corner stanchions Hot-dip galvanized
Rear wall white
Tarpaulin RAL 9005 jet black with advertising lettering
Attention! These are archive pictures.
Ijdpfjkt Ni Uex Afqobc

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.