Avoin puoliperävaunu pressulla

KÖGEL 3-Achs-Cargo-Coil-Pritschensattelanhänger

You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website.

Excerpt from the equipment specification. Full specification available on request.

Chassis
* Coil trough with an internal length of approx. 9,000 mm (shape according to VDI guideline 2700) for accommodating coils with a diameter from min. 900 mm to max. 2,100 mm

Running Gear
* Axle lift mechanism on axle 1
* Three-axle SAF INTRADISC assembly with disc brakes, Ø approx. 430 mm, offset 120
* Air suspension with approx. 180 mm travel
* Tires: 6 x 385/65 R 22.5, 160J - manufacturer of our choice
* 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120)
* Brake / air suspension system
* EBS system 2S/2M with stability program (includes ABS/ALB function)
* EBS socket ISO 7638 (without connection cables)
* Parking brake as spring-actuated brake, external pneumatic connections and external EBS diagnostic port via ISO 7638 socket
* WABCO EBS system
* Air suspension system incl. 1 lift and lower valve, installed on the left in the direction of travel behind axle assembly
* Driving position is set automatically

Floor
Ndodpfx Aajxvgqlehed
* Mounted version on both sides
* Steel pallet stop strips with VarioFix hole pattern (bolted), on the left and right sides in the direction of travel, for internal width approx. 2,468 mm (internal loading height under the outer rail reduced by approx. 20 mm)
* Board floor approx. 30 mm thick, multi-glued plywood, cut out in the area of the coil well
* Coil well side walls covered with plywood sheets approx. 18 mm thick
* Floor circumferentially sealed
* Full wooden cover for coil well, with board floor approx. 27 mm thick

* Stake pockets for square tube insertable stakes approx. 80 x 80 mm
* Arranged as per drawing A2:
* 2 pairs on longitudinal beam at 1st and 2nd position
* 8 pairs on outer frame

* 8 pairs of stake pockets in the coil trough for square tube insertable stakes approx. 80x80 mm
* Arrangement: 1st pair at trough front, 2nd–7th pairs per production drawing, 8th pair at trough end

Body
Fulfills body strength according to EN 12642 XL (VDI 2700)
* Certified for a payload of approx. 27,000 kg
* Front bulkhead at body height with volume corner posts made of aluminum
* Riveted with aluminum hollow profiles, screwed/riveted to the frame
* 1 pair of lashing rings according to EN 12640
* Front bulkhead inside reinforced with approx. 12 mm plywood with textured surface, approx. 1,250 mm high
* Double-winged rear portal door made of aluminum, approx. 2,630 mm inside length
* 4 integrated locking rods (2 left, 2 right)
* Rear corner posts bolted from steel at portal height with additional collision protection up to the first door hinge
* Corner posts on both sides can be mechanically swung out sideways by approx. 500 mm each for loading and unloading
* To operate, the sliding roof must be pushed forward and rear doors opened
* 5 pairs of mounting slots for load securing at rear corner posts side wall
* 3 pairs of KÖGEL sliding rings with holders approx. 600 mm high for inserting 5 slats on top of each other from top of floor. Fixed to the outer frame
* 5 rows of slat holders comprising plug-in slat pockets on the sliding rings and variable supports in the corner posts
* Variable support as spacer for insertable slats (16 pcs), stored in the slat depot of the sliding and corner posts (approx. 100 mm above the floor)
* 4 rows of aluminum V insertable slats at the sides
* VarioFix steel perforated ou

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.