AutonkuljetusautoVOLVO
Arbeitsbühnen Baumaschinentransporter mit Rampen
Autonkuljetusauto
VOLVO
Arbeitsbühnen Baumaschinentransporter mit Rampen
kiinteä hinta ei sisällä ALV
224 500 €
Valmistusvuosi
2025
Kunto
Uusi
Sijainti
Petershagen 

Näytä kuvat
Näytä kartta
Konetiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
224 500 €
- Myyjän sijainti:
- Auf der Tappenau 15, 32469 Petershagen, Saksa

Soita
Tekniset tiedot
- Ajettuja kilometrejä:
- 100 km
- Teho:
- 375 kW (509,86 hv)
- Polttoainetyyppi:
- diesel
- Kokonaispaino:
- 32 000 kg
- Akselikokoonpano:
- 3 akselia
- Väri:
- valkoinen
- Vaihteistotyyppi:
- automaattinen
- Päästöluokka:
- Euro 6
- Kuormatilan pituus:
- 9 000 mm
- Lastitilan leveys:
- 2 550 mm
- Varusteet:
- ABS, ilmastointi, navigointijärjestelmä, pysäköintilämmitin
Tarjouksen tiedot
- Listaustunnus:
- A19742025
- Päivitetty viimeksi:
- 14.01.2026
Kuvaus
4-axle Volvo machine transporter/platform lift transporter
- FH 500 8x2R
Rodpfsw Itmlex Acysn
- Tag axle, electro-hydraulically steered, single tires
- Rear axle suspension with air suspension: 1 drive axle, 1 tag axle
- FH high safety long-distance cab
- Cab auxiliary heater, 2 kW
- 33 l refrigerator with freezer compartment under the bunk
- Air suspension on front axle(s)
- Transmission/I-Shift operation via control unit on driver's seat
- I-Shift driving modes: Standard, Performance, and Economy
- I-See with map-based topography and traffic data
- Eco cruise control (cruise control) including brake cruise
- Manual shifting in automatic mode possible (incl. Kickdown) Adaptive Traction Control
- Adaptive Cruise Control (ACC) with collision warning and emergency braking
- Lane keep assist
- Side collision avoidance and turning assistant (both sides)
- Driver alert system warns of fatigue
- VEB Volvo Engine Brake
- etc.
WIESE body for platform lift and construction machinery transport with hydraulic loading ramps
Includes 2 pairs of wheel recesses incl. wheel recess covers
Body dimensions:
- Length approx. 9,050 mm useable length
- External width 2,550 mm
- Loading height top of floor approx. 1,050 mm unladen
- Sturdy, weight-optimized welded steel construction, box section design
- Short crossmember spacing for high point loads
- Rear end tapered for low approach angle
- Outer frame profile 90°
- Front bulkhead reinforced version
- Storage box inside front lower area
- Grated floor
- Designed for 5,000 daN wheel load
- Steel toolboxes above the axles and outer frame with anti-slip coating
Load securing:
- 9 pairs heavy-duty lashing rings, 8 t, recessed into outer frame
- Side rails each with Multi-X contour along entire length with multiple lashing points 2.5 t
- 4 lashing points 8 t recessed at rear (left/right/center/center)
- 4 lashing points 8 t recessed at front/bulkhead (left/right/center/center)
- Outer frame profile 90°
Loading ramps:
Type: WFB 20 S-2
Capacity: 18,000 kg per pair
Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm)
Platform width approx.: 850 mm per ramp
- Ramps as 2 individual/extendable ramps, both ramps laterally adjustable
- Ramp can be used as loading ramp or as cross-over ramp for warehouse use (extension part remains closed), fixed ramp section lays onto loading bay
- Sturdy locking bar as transport security (optionally with belt system)
- 2 hydraulic rear stabilizers with support plate, warning tone, and indicator light in cab
- Ramp and support operation by electro-hydraulic system
- Control via wireless remote and emergency controls on manifold
- Control manifold mounted in stainless steel toolbox on chassis side
- Superwinch winch 8.2 t with approx. 20 m steel cable
- Access steps with handrail right and left for deck access
- 5 stainless steel toolboxes in drawer version, with lighting as optional extra
- Side skirts as per sample photos (green vehicle) as optional extra
- Body coating KTL
- Ball-type trailer hitch at rear, 3.3 t
- 4 LED work lights
- 2 LED rear lights mounted at top of bulkhead
- 4 LED work lights on outer chassis as perimeter lighting
- 2 LED work lights at rear
- 1 removable beacon at rear
The stock vehicle is finished with a white cab and 'Novagrau' body (outer frame coated in RAL color of your choice on request).
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
- FH 500 8x2R
Rodpfsw Itmlex Acysn
- Tag axle, electro-hydraulically steered, single tires
- Rear axle suspension with air suspension: 1 drive axle, 1 tag axle
- FH high safety long-distance cab
- Cab auxiliary heater, 2 kW
- 33 l refrigerator with freezer compartment under the bunk
- Air suspension on front axle(s)
- Transmission/I-Shift operation via control unit on driver's seat
- I-Shift driving modes: Standard, Performance, and Economy
- I-See with map-based topography and traffic data
- Eco cruise control (cruise control) including brake cruise
- Manual shifting in automatic mode possible (incl. Kickdown) Adaptive Traction Control
- Adaptive Cruise Control (ACC) with collision warning and emergency braking
- Lane keep assist
- Side collision avoidance and turning assistant (both sides)
- Driver alert system warns of fatigue
- VEB Volvo Engine Brake
- etc.
WIESE body for platform lift and construction machinery transport with hydraulic loading ramps
Includes 2 pairs of wheel recesses incl. wheel recess covers
Body dimensions:
- Length approx. 9,050 mm useable length
- External width 2,550 mm
- Loading height top of floor approx. 1,050 mm unladen
- Sturdy, weight-optimized welded steel construction, box section design
- Short crossmember spacing for high point loads
- Rear end tapered for low approach angle
- Outer frame profile 90°
- Front bulkhead reinforced version
- Storage box inside front lower area
- Grated floor
- Designed for 5,000 daN wheel load
- Steel toolboxes above the axles and outer frame with anti-slip coating
Load securing:
- 9 pairs heavy-duty lashing rings, 8 t, recessed into outer frame
- Side rails each with Multi-X contour along entire length with multiple lashing points 2.5 t
- 4 lashing points 8 t recessed at rear (left/right/center/center)
- 4 lashing points 8 t recessed at front/bulkhead (left/right/center/center)
- Outer frame profile 90°
Loading ramps:
Type: WFB 20 S-2
Capacity: 18,000 kg per pair
Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm)
Platform width approx.: 850 mm per ramp
- Ramps as 2 individual/extendable ramps, both ramps laterally adjustable
- Ramp can be used as loading ramp or as cross-over ramp for warehouse use (extension part remains closed), fixed ramp section lays onto loading bay
- Sturdy locking bar as transport security (optionally with belt system)
- 2 hydraulic rear stabilizers with support plate, warning tone, and indicator light in cab
- Ramp and support operation by electro-hydraulic system
- Control via wireless remote and emergency controls on manifold
- Control manifold mounted in stainless steel toolbox on chassis side
- Superwinch winch 8.2 t with approx. 20 m steel cable
- Access steps with handrail right and left for deck access
- 5 stainless steel toolboxes in drawer version, with lighting as optional extra
- Side skirts as per sample photos (green vehicle) as optional extra
- Body coating KTL
- Ball-type trailer hitch at rear, 3.3 t
- 4 LED work lights
- 2 LED rear lights mounted at top of bulkhead
- 4 LED work lights on outer chassis as perimeter lighting
- 2 LED work lights at rear
- 1 removable beacon at rear
The stock vehicle is finished with a white cab and 'Novagrau' body (outer frame coated in RAL color of your choice on request).
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2005
Lähetä pyyntö
Puhelin & Faksi
+49 5704 ... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Pieni ilmoitus
Petershagen
1 463 km
Hinaaja
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
Pieni ilmoitus
HETEREN
1 633 km
Nosturiauto
VolvoFMX 500 FMX 500 8x2 Euro 6 Effer 395-8S
VolvoFMX 500 FMX 500 8x2 Euro 6 Effer 395-8S
Pieni ilmoitus
Petershagen
1 463 km
Avolava kuorma-auto
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
Pieni ilmoitus
Turkki
2 483 km
JCB JS290 Long Reach Boom Arm Manufacturing (Pitkän ulottuvuuden puomivarsi)
JCBJS290 Long Reach Boom-Arm Manufacturing
JCBJS290 Long Reach Boom-Arm Manufacturing
Pieni ilmoitus
Aichach
1 756 km
Autonkuljetusauto
IVECOAS320S50 Baumaschinentransporter hydr. Rampe
IVECOAS320S50 Baumaschinentransporter hydr. Rampe
Pieni ilmoitus
Petershagen
1 463 km
Hinaaja
MANBaumaschinen- Arbeitsbühnentransporter Rampen
MANBaumaschinen- Arbeitsbühnentransporter Rampen
Pieni ilmoitus
Espanja
2 857 km
Minikaivukone
DaewooSO75 V PLUS
DaewooSO75 V PLUS
Pieni ilmoitus
Geffen
1 664 km
Autonkuljetuspakettiauto
DAFXF 106.480 106 XF 480
DAFXF 106.480 106 XF 480
Pieni ilmoitus
Fogato
2 083 km
ALUSTA RAMPEILLA
MANTGM 22.290
MANTGM 22.290
Pieni ilmoitus
Deventer
1 589 km
Standard-SZM
IvecoEuroCargo 80 ML80E22 tractor with Heinemann 2 a...
IvecoEuroCargo 80 ML80E22 tractor with Heinemann 2 a...
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe


























































































































































